Danby DAR0488BL Manuel d'utilisateur télécharger pdf (Page 3)

Tools: Phillips #2 Screwdriver

Unplug the refrigerator and empty all of its contents

2. Remove the Plastic Retaining Cap from the top left side of the cabinet.

3. Remove the Top Door Pin Cap from the top left side of the door.

4. Remove the Plastic Hinge Cap from the right side of the cabinet.

5. Unscrew the three screws holding the Top Hinge Assembly to the cabinet (on the right side of the unit) and remove

the hinge.

6. Install the Top Hinge Assembly on the top left side of the cabinet.

7. Insert the Top Door Pin Cap into the top right side of the door.

8. Lay the unit on its back.

9. Unscrew the Three Retaining Screws on the bottom left side of the cabinet.

10. Unscrew the three screws holding the Bottom Hinge to the cabinet and remove the hinge.

11. Install the Bottom Hinge on the bottom left side of the door and cabinet.

12. Install the Three Retaining Screws on the bottom right side of the cabinet (the former bottom hinge location).

Door Reversal Instructions

Plastic Retaining

Cap

Bottom Hinge

Three Retaining Screws

Top Door

Pin Cap

Top Hinge Assembly

(Hinge + Plastic Cap)

1 2 3 4 5 6 7 8 ... 12 13

Pas de commentaire

Danby DAR0488BL Manuel d'utilisateur Page 3