Danby DFG17A1B Manuel du propriétaire télécharger pdf (Page 6)

OPERATING INSTRUCTIONS

TIMER OPERATION

The timer will turn the light system on and off based

on the chosen settings, creating a regular light and

dark cycle for plants just as they would experience

when growing outdoors.

Different plants will grow best under different light

cycle conditions; some need more light and some

need less. Check the back of the seed packet for

information on the best light cycle to set for the

plants being grown.

To program the timer:

1. Press and hold the set button for 5 seconds until

“TS” appears on the display.

2. Press the up and down arrows to set the current

time to the nearest hour. The default time is

12:00 am, indicated by a ‘0’.

3. Once the current time is set, there are two preset

operating modes to choose from.

• Press the up arrow to choose preset P1.

• P1: 12 hour light cycle, meaning the lights

will be on for 12 hours and off for 12 hours.

• Press the down arrow to choose preset P2.

• P2: 18 hour light cycle, meaning the lights

will be on for 18 hours and off for 6 hours.

Note: The timer is a 24 hour clock and can only be

set to the closest hour.

For example, if the current time is 3:45 pm, set

the clock to 16 indicating 4:00 pm. Always set the

current time to the nearest hour.

The timer will not display the current time. It uses the

set time as a guideline for the day and night cycle

and to count the hours before turning the light on or

off.

TIMER OPERATION

The preset modes can be altered by following the

steps below.

1. Press and hold the set button for 5 seconds until

“TS” appears on the display.

2. Press the set button repeatedly to choose from

the settings outlined in the below charts.

3. Use the up and down arrows to modify the

chosen setting.

Mode P1

• The time when the light will turn on

• The default is 7:00 am

• The number of hours that the light will remain on

• The default is 12 hours

Mode P2

• The time when the light will turn on

• The default is 6:00 am

• The number of hours that the light will remain on

• The default is 18 hours

Light Temperature Setting

• The temperature at which the light will turn off

• Default: 32°C (90°F)

• Temperature range: 30°C - 35°C (86°F - 95°F)

• The temperature at which the light will turn on

• Default: 30°C (86°F)

• Temperature range: 26°C - 34°C (79°F - 93°F)

Note: T1 must be higher than T2

Fan Temperature Setting

• The temperature at which the fan will turn off

• Default: 17°C (63°F)

• Temperature range: 16°C - 20°C (61°F - 68°F)

• The temperature at which the fan will turn on

• Default: 19°C (66°F)

• Temperature range: 18°C - 22°C (64°F - 72°F)

Note: F1 must be higher than F2

1 2 3 4 5 6 7 8 9 10 11 ... 25 26

Commentaires sur ces manuels

Pas de commentaire

Danby DFG17A1B Manuel du propriétaire Page 6

Commentaires sur ces manuels

Produits connexes et manuels pour Non Danby DFG17A1B