Danby DDW631SDB Manuel du propriétaire télécharger pdf (Page 11)

OPERATING INSTRUCTIONS

1. Load the dishwasher as per the loading

instructions.

2. Add detergent and rinse aid as required.

3. Ensure the dishwasher is connected to a water

supply and that the water is turned on.

4. Insert the plug into the power supply.

5. Close the dishwasher door and press the power

button to turn on the appliance.

6. Press the Program button repeatedly to choose

the desired wash program. The programs will

cycle in the following order: Heavy -> Normal

-> Baby Care -> ECO -> Glass -> Speed ->

Rinse -> Mini-Party

7. Press the Start/Pause button to begin the cycle.

A forgotten dish can be added to a running cycle

any time before the detergent dispenser has

opened. If the detergent has already been released

into the appliance, it is recommended not to add

more dishes as they will not receive adequate

cleaning.

To add a dish:

1. Press the Start/Pause button to pause the cycle.

2. Open the door slowly as the spray arm may still

be turning.

3. Add the forgotten dishes.

4. Close the door.

5. Press the Start/Pause button to resume the cycle.

The appliance can take up to 10 seconds to

restart.

When a wash cycle is completed, a buzzer will

sound for 8 seconds, then stop. The appliance will

automatically turn off after 30 minutes of inactivity.

To turn off and unload the dishwasher:

1. Press the power button to turn the appliance off.

2. Turn off the water supply and unplug the

appliance from the power source.

3. Allow the appliance to remain undisturbed with

the door closed for approximately 5-10 minutes

at the end of a cycle. Opening the door too

quickly while the internal temperature is still very

hot can cause ﬂ ash drying which can leave spots

and streaks on dishes.

4. Open the door carefully as the air inside the

appliance can still be hot. Leave the door ajar

for a few minutes before removing dishes to

allow them to cool and dry. Hot dishes can be

sensitive to knocks and may break; they should

be allowed to cool before removing from the

appliance.

Note: There is no drying cycle in this appliance.

Dishes should be left inside the unit for a short

period after a cycle so that the warm air inside

the appliance can assist in the drying process. It

is normal for dishes to still be wet at the end of a

cycle.

Note: It is normal for a small amount of water to

remain inside the appliance at the end of a cycle.

This water will evaporate and does not need to be

manually drained.

STARTING A WASH CYCLE ENDING A WASH CYCLE

ADDING A FORGOTTEN DISH

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 43 44

Commentaires sur ces manuels

Pas de commentaire

Danby DDW631SDB Manuel du propriétaire Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Lave-vaisselle Danby DDW631SDB